Aison STE16L-C, Instruction Manual

Page: 12 / 34

Instruction manual
- 9 -
start a cycle until you close the door completely and press the "Start" button again.
5.4.3 Sterilization cycle end
After a cycle completes, the printer will start work and print the report of the
sterilization cycle data if you have install it. During the sterilization prog ress,alert
beep would occur if temperature or pressure has any fault.After the pressure is 0 ,you
may open the door, and take out the sterilized instruments.
Please use the tray handle to load or unload the tray in order to avoid scald.
5.4.4 Drain
Whe never blinks, it means the used water tank if full, you need to drain it
immediately in the way as following described.
1.Push the hose to the waterspout of the
connector.
2.Turn the waterspout anticlockwise.