AIS HMI?TCND0U?10AR?X00H HMI?TCND0U?22AR?X00H, User Manual

Page: 5 / 50

o
The equipment has obvious signs of breakage.

Do not leave this equipment in an uncontrolled environment where the storage temperature is below
-20° C (-4°F) or above 60° C (140° F). It may damage the equipment.

CAUTION – Use the recommended mounting apparatus to avoid risk of injury.

WARNING – Only use the connection cords that come with the product. When in doubt, please contact
the manufacturer.

WARNING – Ground against electrostatic damage to the device by taking the following preventive
steps:
o
Cover workstations with approved anti-static material. Use a wrist strap connected to a work
surface and properly grounded tools and equipment.
o
Use anti-static mats, heel straps, or air ionizer for added protection.
o
Handle electrostatic-sensitive components, PCB’s and assemblies by the case or the edge of the
board.
o
Avoid contact with pins, leads, or circuitry.
o
Turn off power and input signals before inserting and removing connectors or test equipment.
o
Keep the work area free of non-conductive materials, such as ordinary plastic assembly aids and
Styrofoam.
o
Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that are conductive.
o
Always lay drivers and PCB’s with the component side down on anti-static foam.
Intended Use
Premium HMI Touch Panels are primarily intended for use in HMI, SCADA & MES applications. They are
suitable for use in industrial environments and are typically used for automation purposes.
Important Information
Federal Communications Commission Radio Frequency Interface Statement – For USA
This device complies with part 15 FCC rules. Operation is subject to the following
two conditions:

This device may not cause harmful interference.

This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "A" digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at him own expense.