AIS HMI?TCND0U?10AR?X00H HMI?TCND0U?22AR?X00H, User Manual

Page: 4 / 50

Safety Information
Warning!
Always completely disconnect the power cord from your chassis whenever you work
with the hardware. Do not make connections while the power is on. Sensitive
electronic components can be damaged by sudden power surges. Only experienced
electronics personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before touching the CPU card.
Modern electronic devices are very sensitive to static electric charges. As a safety
precaution, use a grounding wrist strap at all times. Place all electronic components in
a static-dissipative surface or static-shielded bag when they are not in the chassis.
Safety Precautions

Please read these safety instructions carefully.

Please keep this user's manual for later reference.

Please disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray
detergents for cleaning. Use a damp cloth.

For pluggable equipment, the power outlet must be installed near the equipment and must be easily
accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause
damage.

The openings on the enclosure are for air convection and to protect the equipment from overheating.
DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source is correct before connecting the equipment to the power
outlet.

Position the power cord so that people cannot step on it. Do not place anything over the power cord.

All cautions and warnings on the equipment should be noted.

If the equipment is not used for a long time, disconnect it from the power source to avoid damage by
transient over-voltage.

Never pour any liquid into an opening. This could cause fire or electrical shock.

Never open the equipment. For safety reasons, only qualified service personnel should open the
equipment.

If any of the following situations arises, get the equipment checked by service personnel:
o
The power cord or plug is damaged.
o
Liquid has penetrated into the equipment.
o
The equipment has been exposed to moisture.
o
The equipment does not work well or you cannot get it to work according to the user’s manual.
o
The equipment has been dropped and damaged.