6
EN
EN
FR
IT
PT
DE
OneZone thermostat
Power supply and consumption
V max.
3.3 Vdc ± 10 %
Stand-by consumption
108 mW
Communications
Maximum distance
50 ft
Operative temperatures
Stock -
Operation
Operating humidity range
(non-condensing)
Set-point temperature range
Reading accuracy ± 1ºF (0.5ºC)
Display accuracy ± 1ºF (0.5ºC)
Mechanical aspects
Dimensions (WxHxD) 4.13x3.58x0.94 inch
INSTALLATION
ONEZONE DAMPER
Important:
To install this system a screwdriver may be required.
To complete the installation, follow the steps:
1.
Insert batteries (C Type) in the battery box following the directions for the batteries polarity.
2.
3.
Connect the motor cable to the battery box.
4.
Remove the air supply grille and insert the damper in the supply duct.
5.
Affix the IR receiver connected to the battery box in the grille frame pointing towards where the thermostat will be
installed. Use the adhesive strapped to the IR receiver cable.
Important:
Do not block the IR receiver, nor the transmitter in the thermostat. For a proper functioning, both devices have
to have direct visual contact.
6.
Return the grille to its original position.
D
H
W
Summary of Contents for OneZone
Page 1: ...r e b m u N e g a P d r a o b p il C ETQB PM Installation Manual OHMJTI ...
Page 2: ......
Page 23: ......
