17
ES
EN
FR
IT
PT
DE
WARNINGS AND ENVIRONMENTAL POLICY
PRECAUTIONS
For your security, and to protect the devices, follow these instructions:
Do not handle the system with wet or damp hands.
Disconnect the power supply before making any connections.
Take care not to cause a short circuit in any of the system connections.
ENVIRONMENTAL POLICY
Do not dispose of this equipment in the household waste. Electrical and
electronic equipment contain substances that may damage the environment
if they are not handled appropriately. The symbol of a crossed-out waste bin
indicates that electrical equipment should be collected separately from other
urban waste. For correct environmental management, it must be taken to the
collection centers provided for this purpose, at the end of its useful life.
with
current regulations on environmental protection.
If you replace it with other equipment, you must return it to the distributor or
take it to a specialised collection centre.
Those breaking the law or by-laws will be subject to such fines and measures
as are laid down in environmental protection legislation.
GENERAL REQUIREMENTS
Strictly follow the directions outlined in this manual:
This system must be installed by a qualified technician.
Make all the connections with total absence of power.
Set and connect the elements in accordance with the electronic regulations in force.
In order to connect the elements of the system, use the Airzone cable: shielded twisted cable
formed by 4 wires (2x0.22 mm2 + 2x0.5mm2).
Do not connect the "-" pole in the "+" terminal. It may damage the device.
For elements externally powered at 230 Vac, for the communications, it is only necessary to
connect the poles "A" and "B" of the bus. Connecting the "+" and " -" power poles is not
recommended.
Follow the color code for all the elements of the system.
Do not place the system bus close to lines of force, fluorescent lights, motors, etc. It might cause
interference on communications.
