21
S21 Connection (AZAI6WSPDKC)
The DKN Plus Adaptor for Ductless units has one wiring cable. Follow these steps to connect it:
1.
Disconnect the indoor unit power.
2.
Connect the
A+C
supplied cable to
S21
connector on the indoor unit or an accessory adapter (ordered separately).
3.
Power the indoor unit. Check the LEDs (see LED Operation section).
T h e
LED of the DKN Residential Cloud Wi-Fi Adaptor for Ductless stays blinking in green when the connection is
correct.
Note
: To facilitate the access to the DKN Residential Cloud Wi-Fi Adaptor for Ductless units, place it in an accessible location.
S21
C
+
A
P1P2 Connection (AZAI6WSPDKC)
The DKN Plus Adaptor for VRV/SkyAir units has 4 connecting wires: 2 for communication with the indoor unit (red and black)
and 2 for the power supply. Follow these steps to connect them:
1.
Disconnect the indoor unit power.
2.
Connect the DKN to the terminals of the indoor unit using the
A+B
supplied cable,
X35A/X18A/X9A
(depending on
the indoor unit) and
P1 P2
.
3.
Power the indoor unit. Check the LEDs (see LED Operation section).
The
LED of the DKN Cloud Wi-Fi Adaptor for VRV/SkyAir stays blinking in green when the connection is correct.
Note
: To facilitate the access to the DKN Cloud Wi-Fi Adaptor for VRV/SkyAir units, place it in an accessible location.
Note:
For FXTQ_PA(B) and FTX_PA(B) indoor units, use the
X9A
terminal on the A2P PCB for power supply.
X35A
P1 P2
A
B
+
