background image

ROOM
TEMPERATURE

Measures and displays room temperature. 

BUZZER                  A soft buzzer will sound from the indoor unit display to indicate that a command

                               sent by the remote control has been accepted and stored in the unit s memory.
                               This feature may be  easily cancelled by the user from the display panel.

3-MIN
DELAYED RUN

                          This compressor is protected by a three-minute delayed restart.

MEMORY                The microprocessor retains the last data entry whether or not the unit is plugged

                               in. Therefore, when the unit restarts after a power distruption or failure, it will 
                               resume operating in the same mode as before the power was disrupted.

LOCK                      Freezes the last operation setting on the remote control. When LOCK is

                               activated, the remote control will not be able to control the air-conditioner.

AUTO FLAP

The air flap (louvers) is automatically positioned for the most suitable blow-out 
angle, when COOL, HEAT, DRY or FAN modes are selected. When the air 
conditioner is turned off, the flap will close automatically for an aesthetic 
appearance.

VERTICAL AIR 
SWING

Automatic swing of supply air in vertical direction. The flap moves automatically 
in upward and downward direction to spread the conditioned air evenly 
throughout the room.

ON UNIT 
OPERATION

The air conditoner can be aturned ON for COOLING or HEATING or be turned 
OFF directly form the indoor unit display panel without the use of the remote 
control.

HORIZONTAL
AIR SWING

Automatic swing of Horizontal air flow in Horizontal direction.
The flap move automatically in right and left direction to spread the conditioned
air evenly throughout the room.

ELECTROSTATIC
FILTER

IONIZER

Ionizer make the air more fresh and more comfort.
lide switch (O) to the ON position to activate the ionizer. The blue light
indicator (N) on the unit will light up indicating the ionizer in operation. To
cancel the operation set slide switch to OFF position.
Important Notice:When the air-conditioner is turned OFF or if the indoor
fan stops operation the IONIZER stops automatically.

4

They are capable of capturing small particles down to 0.1 microns,
Such as atmospheric and house hold dust,coal dust,insecticide dust,
mites,pollen,pet dander,tobacco saoke particles,cooking smoke and
grease,mold fungi,bacteria,viruses and more.

Summary of Contents for XLM14RCA






























Reviews: