A 5 m of air refreshing hose is supplied with
this equipment. You can length the hose
with another hose supplied by the
professional installer in the installation if it is
needed. Use the hose elbow and clamps to
joint the smaller end (O30) of the added
hose with the original one, and then fix the
other end with the interface of the propeller
housing by the outdoor hose clamp (O30).
(Shown in below diagram).
(The part with * in the diagram will be
supplied in the installation if you need to
length the air refreshing hose)
Air fresh hose
Fig 1
Air pipe joint
Fig 2
1. Joint the air pipe joint on the outdoor unit.
2. Joint the air fresh hose on the air pipe joint and fix the indoor hose damp (O30) (Fig 1).
3. Joint the air fresh hose with the interface of the propeller housing and fix with outdoor hose clamp (O30) (Fig 2)
8
INSTALL THE AIR FRESH HOSE (Optional)
