1-2
INTRODUCTION
SM XLFDCI 1-A.1 GB
•
Coil with treated aluminum fins.
•
Motorized flaps.
•
Multi-speed motor with internal protection.
•
DC motor with internal protection.
•
Advanced electronic control box assembly.
•
Interconnecting wiring terminal block.
•
Mounting plate.
1.4 Filtration
The
XLF DCI
series presents one type of air filters:.
•
Easily accessible, and re-usable pre-filters (mesh).
1.5 Control
The microprocessor indoor controller, and an infrared remote control, supplied as
standard, provides complete operating function and programming. For further details
please refer to the Remote Control Manual, Appendix A.
1.6 Outdoor
Unit
The
XLF DCI
outdoor units can be installed as floor or wall mounted units by using a
wall supporting bracket. The metal sheets are protected from corrosion allowing long life
resistance. All outdoor units are pre-charged. For further information please refer to the
Product Data Sheet, Chapter 2.
It includes:
•
Compressor mounted in a soundproofed compartment :
•
Axial fan.
•
Outdoor coil with hydrophilic louver fins for RC units.
•
Outlet air fan grill.
•
Service valves” flare” type connection.
•
Interconnecting wiring terminal block.
•
GC 9 R410A
•
GC 12 R410A
1.7 Tubing
Connections
Flare type interconnecting tubing to be produced on site.
For further details please refer to the Installation Manual, APPENDIX A.
CONTENTS
