CONTROL SYSTEM
11-3
SM VAR 1-A.1 GB
11.1.5
Display Board
:LEXAN
11.1.6
Display Board : Assembly
11.1.7
Legend :
D
I
J
K
P
Q
H
O
N
M
L
G
F
E
C
B
A
heat cool
mode
reset
18 20 22 24 26 28 30
H M L A
A) HEATING
Lights on during operation. Heating and filtration of the
air in the room. Sustainment of required ambient
temperature.
B) COOLING
Lights on during operation. Cooling, dehumidification
and filtration of the air in the room. Sustainment of
required ambient temperature.
C) VENTILATION
Lights on during operation. The unit is running in
ventilation mode only.
D) MODE Button
Pressing the button changes unit function between
COOL – HEAT – FAN.
E) POWER
Lights on as soon as the unit is energized.
F) PROGRAMMING
Comes on during operation. Flashes to indicate that the
remote control signal has been received and stored in
the memory (applicable with remote control only).
G) FILTER
Comes on when the air filter needs to be cleaned. After
cleaning and re-installation of the filter, the system must
be reset (RESET button).
H) TEMPERATURE
Set temperature display
18 lights - 18ºC
18 & 20 lights - 19ºC
20 lights - 20ºC
I) TEMPERATURE
SET
DECREASE
Each pressing decreases set temperature by º1C.
J) TEMPERATURE SET INCREASE
Each pressing increases set temperature by º1C.
K) FAN
Each pressing changes fan speed MEDIUM – LOW –
AUTO.
L) FAN
H – High speed
M) FAN
M – Medium speed
N) FAN
L – Low speed
O) FAN
A – Automatic
P) RESET
Press to switch off the indicator light and activate the
filter function, after cleaning and re-installing the filter.
Press to cancel the audible warning.
Q) ON/OFF
Unit On/Off button.
CONTENT
