background image

 Page 13 

Care and Maintenance

Cleaning Your Indoor Unit

 BEFORE CLEANING OR

 

 MAINTENANCE

ALWAYS TURN OFF YOUR AIR CONDITIONER
SYSTEM AND DISCONNECT ITS POWER SUPPLY
BEFORE CLEANING OR MAINTENANCE.

 

 

 

 

 

 

 

 

 

 

 

 

 

 CAUTION

Only use a soft, dry cloth to wipe the unit clean. 
If the unit is especially dirty, you can use a cloth 
soaked in warm water to wipe it clean.

• 

Do not

 

use chemicals or chemically treated 

cloths to clean the unit

• 

Do not 

use benzene, paint thinner, 

polishing powder or other solvents to clean 
the unit. They can cause the plastic surface 
to crack or deform.

• 

Do not

 use water hotter than 40°C (104°F) 

to clean the front panel. This can cause the 
panel to deform or become discolored.

Cleaning Your Air Filter

A clogged air conditioner can reduce the cooling 
efficiency of your unit, and can also be bad for 
your health. Make sure to clean the filter once 
every two weeks.

 WARNING: DO NOT REM OVE OR 

CLEAN THE FILTER BY YOURSELF 

Removing and cleaning the filter can be 
dangerous. Removal and maintenance must be 
performed by a certified technician.  

Ca
re and 

Maintenance

Cleaning the dust filter located at the bottom of 
the unit:

Seize the left and right at the bottom of the 
strainer mesh put his hand to pull, remove 
the strainer mesh.Place the strainer mesh 
clean, dry in the shade.Packed strainer mesh .

Rinse the filter with clean water and allow 
it to air-dry. 

DO NOT

 let the filter dry in 

direct sunlight. 
Reinstall the filter. 

Remove the air filter.
Clean the air filter by vacuuming the surface 
or washing it in warm water with mild 
detergent.  

If using a vacuum cleaner, 

the inlet side should face 

the vacuum. 

If using water, the inlet side 

should face down and away 

from the water stream. 

2.
3.

4.

5.

1.

Summary of Contents for SDMX R32





































Reviews: