4
MD Multi-duct cassettes
MD Multi-duct cassettes
2. OUTDOORS UNIT
Of compact design, taking up very little floor area, this unit houses the «Scroll»
compressor, the fan-condenser assembly and the electrical box.
Two installation possibilities:
• Direct floor installation.
• Wall hanging with accessory (not supplied).
3. REFRIGERATION CIRCUIT
Both the indoors and outdoors units are equipped with
«FLARE»
connectors,
enabling the use of
«FLARE»
refrigeration pipes (refrigeration quality copper
pipe)
Depending on the model, pipe lengths can extend up to 50 m.
Heatpump models
are equipped with a cooling cycle inversion system enabling
them to operate in an
AIR/AIR
thermodynamic heating mode down to outside
temperatures as low as –10° C.
A good coefficient of performance (COP) for the transfer of calories from the
outside to the premises to be air conditioned is achieved.
4. OPTIONS
The
Cooling only
and
Heatpump models
can be equipped with:
• Electric heating
• New air intake
• Manual treated airflow gate
• Centralised system control possible with
RCW-2
wall mounted remote control.
5. DOCUMENTATION
Each unit is supplied with general wiring and connection diagrams and specific
installation and operation instructions.
Each accessory (or kit) is accompanied by technical specifications for fitting and
adjustment as required.
