40
MD Multi-duct cassettes
MD Multi-duct cassettes
INFRARED
RECEIVER
Connections between
the control panel and
the infrared receiver
• The equipment is supplied with a 7m long shielded cable, fitted with connectors
at both ends for connecting the electrical box to the infra red receiver.
·
• In the event of difficulties is using the connection cable it is possible to cut the
cable and make the connection on the receiver by means of the terminal
block.
Electrical
box
Electrical
box
• In this case, the above colour code should be followed. It corresponds to the
colours of the 7 conductors plus the Ground connection that must be connected
to the last terminal marked Gd
Gd
Gd
Gd
Gd.
• To guarantee a good connection, end fittings for 0.25 mm² section cable
must be fitted to the cable ends.
An extended cable length can
be supplied on request
Press gently on the clips to
raise the cover.
8 RED
7 GREY
6 WHITE
5 GREEN
4 BROWN
3 YELLOW
2 ORANGE
1 GOLD GROUND
