Set the function control switch to “Off”.
Insert the power plug, and turn on the power of the unit.
Turn the temperature control switch to position to “6” (the coolest)
and make preparations for other operations.
3
High Cool
Turn the function selector switch to “Hi Cool” then the unit automatically conducts
the high cool operation, so that the room temperature is reduced rapidly and at
the same time the room is being dehumidified and dust is being filtered.
Low Cool
Turn the function selector switch to “Low Cool” and the unit automatically
conducts calm cooling operation and eliminate dust from the room.
Temperature Adjustment
After turning on the unit, adjust the temperature controller when the room
temperature reduces to the point you desire. Slowly turn the knob from the
coolest point “6”. The compressor will stop operating when a “click” sound is
heard, indicating that further cooling will stop. The temperature controller
automatically turns on the unit for cooling after the room temperature has
gradually increased, and the temperature controller turns off the cooling
operation when the room temperature reduces to that you choose.
Note:
O
Adjust the temperature controller until you feel comfortable (normally 26 - 30 C).
After the temperature controller is adjusted, remember that the temperature control
knob can not be adjusted clockwise within 3 minutes, otherwise the compressor
will be burnt out.
SELECTOR
Hi Cool
Lo Cool
Hi Fan
Lo Fan
Off
SELECTOR
Hi Cool
Lo Cool
Hi Fan
Lo Fan
Off
PREPARATIONS FOR OPERATION
COOLING OPERATION
COOLING OPERATION
THERMOSTAT
Coolest
2
4
3
5
6
1
C
oo
l
RCA INST MANUAL
