24
INSTALLATION
1. Choose a location which will provide good air circulation.ensure that no
objects or furnishings prevent air circulation.
2. Do not install the unit near a heat source or where it will be exposed to direct
sunlight.
3. The location must allow convenient electrical, drainage and tubing connec-
tions.
4. Installation site should provide an easy passage to outdoors.
5. The unit must be mounted on a strong wall that will withstand the appliance:
-
FLO
(Mounting plate supplied)
–
SX
(Support supplied)
–
K
(Fits into a suspended ceiling and it is attached by means of threaded
rods on the mounting lugs)
indoor unit
outdoor unit
1. The location must allow easy servicing
2. Avoid any recycling, even partial, of blown air with fresh air.
3. The unit may be suspended from a wall or located in a free standing position
on the floor (slightly elevated - Place the mounting pads under the legs).
4. if the unit is suspended, ensure that the bracket is firmly connected and the
wall is strong enough to withstand appliance.
Refer to detailed fitting
instructions in the installation
manual supplied with the
equipment.
