Airwell FLO 24 series, Programming And Operating Manual

Page: 8 / 14

5
A. Stand-by Operation indicator
Lights up in red when
connected to power. Lights up
in green during operation.
B. ESF/ Ionizer/Fresh air indicator
Lights up during the ESF
or lonizer or Fresh air operation.
(optional)
C. LCD operation display
D. Timer indicator
Lights up during timer
and sleep operation.
E. Filter indicator
Lights up when air filter
requires cleaning.
F. Signal receiver
Receive signals from the
remote control.
G. Ionizer indicator
Lights up during ionizer
operation
H. Ionizer on/off switch
Used to switch the ionizer
on/off.
I. Electrostatic filter operation
button
Used to switch the Electrostatic
filter on or off
J. Cooling indicator
Lights up only when Mode (M)
is pressed.
K. Reset button
Press to turn off the filter
indicator and to reset the
filter function, after the
cleaned filter has been
reinstalled.
Press to cancel the buzzer
announcer.
L. Heating indicator
Lights up only when Mode (M)
is pressed.
M. Unit mode button
Used to switch the unit off or
to turn it on for cooling or
heating without the remote
control.
N. Electrostatic filter safety button
Turn off the Electrostatic filter
when you open the grille.
I
J
K
COOL
ESF-EN
RESET
HEAT
MODE
ESF-PWR
L
M
N
B C D E F
G H
A
If the air-conditioner can not be operated by the Remote
Control unit, it can be turned on for cooling or heating, or
completely turned off, by pressing MODE button (M) on the
air-conditioner. The MODE button will change the operating
status of the unit between - COOLING - HEATING -STAND BY
positions. Every time MODE button (M) is pressed, (J) or (L)
will light up respectively, to indicate in which mode the
air-conditioner operates.
On-unit Operation