Airwell FLO 24 series Programming And Operating Manual Download Page 4

Page: 4 / 14

AUTO

Air Filtration.

Cooling.

Dehumidifying.

Heating.

Ventilation

INTRODUCTION

Dear customer:

The DC Inverter air conditioner you have purchased is one of the
most advanced units of its kind. The DC Inverter air conditioner is
a variable capacity air conditioner which uses high efficiency DC
motors for the compressor and the outdoor fan. Unlike other
models, it can adjust its capacity according to the user setting
and the environmental condition, thus saving up to 30% of the
seasonal power consumption, while keeping maximum comfort
level. This modern unit is also equipped with an ionizer (optional)
and an Electrostatic filter (optional) to maximize your indoor air
quality.
Detailed instruction as to the DC Inverter air conditioner (including
Single & Multi Split type) functions and way of operation are
provided in the following pages.

This Split Air Conditioner is designed for versatile application:

OPERATING TEMPERATURE
RANGE:

IMPORTANT NOTICE:

This air conditioner must be
grounded to protect against
electrical shock.

Installation of the air conditioner
must be performed by an
experienced air conditioning
installer, observing good
refrigeration practice.

Electrical connections and power
cord replacement should only be
made by authorized electricians
and in accordance with electrical
regulations and local codes. The
applicance must be positioned so
that the plug is accessible.

Failure to comply with the
manufacturer's installation and
operation instructions could affect
the performance of the air
conditioner and the validity of the
warranty.

Test Mode

Test Mode is set only for
performance testing purposes,
and not for user operation. Test
mode can be initiated by either
one of the following conditions:
1) Operating the unit with the
following remote control settings
and temperature conditions:
Cool Mode, SPT=16

and

RAT=27

OAT=35

for 30 minutes;

Heat Mode, SPT=30

and

RAT=20

OAT=7

for 30 minutes. 2)

Entering Diagnostics with
Cool/SPT=16

Heat/SPT=30