2. Installation Process of IR Extender system:
2.1. Connect power supply for transmitter and receiver as per step in item A.
2.2. Insert the attached antenna into the socket on the top of the transmitter and receiver unit individually.
(The antenna is optional not for
standard
Accessories.)
2.3. Set up the receiver unit in front of your electronic appliances (TV, VCR, ...) to be remotely controlled and arrange
the unit so that its purple semitransparent window faces the electronic appliances.
2.4. Aim the infrared controller of your electronic appliance at the purple semitransparent windows of the transmitter
unit and operate the transmitter unit in the same way as aiming directly at the electronic appliance.
2.5. If the transmitter receives the infrared signal successfully, the purple semitransparent windows of transmitter
will flash the red LED light and transmit RF signal to the receiver.
2.6. If the IR receiver receives the RF signal successfully, its window will also flash the red LED light simultaneously
and emit IR signal to the household appliances (TV/VCR) and the remote control process is totally completed by
now.
3. Application
Example:
Rx
Tx
IR LED
* Remote
Control
or Mouse IR LED
IR Sensor
5
Summary of Contents for AWX 701-A
Page 12: ...DOC0000 0167...
