Trouble Shooting
1. Transmitter unit does not follow the commands from infrared controller
1.1. Check the power supply of transmitter first,
1.2. For batteries power only -
Check the batteries and be sure the “+, - ” ends are correct and double check if the batteries still work.
1.3. Check the distance between your infrared controller and the transmitter unit of IR Extender - its effective
transmitting range is within 10 meters.
2. If receiver unit does not work, but transmitter unit works with the commands from
infrared controller
2.1. Check the power supply of receiver first - normally when the power is on, the semitransparent window of
receiver will flash the read LED light once.
2.2. Check the antenna of the transmitter & receiver of IR extender- be sure they are firmly installed.
2.3. Check the distance between the transmitter & its receiver of IR Extender - normally the effective transmitting
range at line of sight is about 100 meters.
3. The transmitter & receiver units do work but cannot follow the right commands from
your infrared controller
3.1. Check the direction of transmitter semitransparent window of the receiver unit of IR Extender - be sure its
direction is to the household appliance to control,
7
Summary of Contents for AWX 701-A
Page 12: ...DOC0000 0167...
