4
Initial Setup:
1. Remove the plastic bag covering from the humidifier.
2. Unravel and straighten the cord before use.
3. Remove the tank from the humidifier base by grasping the
tank handle, and pulling straight up. Figure 1.
4. Turn the tank upside down and twist the tank cap counter-
clockwise to remove. Figure 2.
5. Fill the unit with clean, cool tap water Figure 3.
Warning:
Never fill the humidifier with hot water.
6. Place the tank cap back on the tank and turn it
clockwise until secure Figure 4.
7. Seat the tank back into the humidifier base, making sure
the tank is seated securely.
NOTE:
Failure to ensure the tank is seated correctly could
cause the unit to leak water from the tank.
8. Plug the humidifier into a wall outlet and start the unit.
Figure 1
Figure 3
Figure 2
Figure 4
Operation:
1. Touch first time, the unit starts working with level 1 mist
output and LED light will be in green color.
2. Touch second time will turn to level 2 mist output and
light will turn to blue color. Touch third time is OFF.
3. When lack of water, LED light will be red color and there
will be a short “Beep” sound for warning.
Using Your Humidifier
Initial Setup and Operation
2
