Airvana AIRAVE Sprint, User Manual

Page: 7 / 30

— 7 —
D
R
A
FT
4
Observe AIRAVE’s LEDs as it starts up:
•
All indicators light up.
•
Broadband, Mobile, and GPS blink and then turn solid green when the component
is ready.
•
VoIP Phone only lights up if you have subscribed for phone service.
•
Voicemail will light up later when a message is available.
5
If the GPS LED does not light up after 30 minutes, use the external GPS antenna.
a
Connect the external GPS antenna to AIRAVE.
b
Place the external GPS antenna horizontally on a flat surface as close to a window
as possible. The antenna works best in an open area where it can easily pick up
signals.
NOTE:
Allow up to two hours for AIRAVE to be ready the first time you use it.
When Broadband, GPS, and Mobile are solid green, AIRAVE is ready for use.
6
Optionally, connect a computer or a home router to the AIRAVE LAN ports.
NOTE:
Always connect the home router to AIRAVE. Do not connect it to the broadband
modem/router.
7
Optionally, connect your telephone to the AIRAVE phone port.
NOTE:
It may take AIRAVE up to 30 minutes to pick up a GPS signal the first
time you power it on. Subsequent startups take 10 minutes or less.
Broadband
GPS
Mobile
VoIP Phone
Voicemail