10
CHANGING THE MODE
1.
Turn on the BT-106.
2.
Press and hold the MODE button for 2 seconds. The
red LED will flash once per second from 1 to 6
flashes. The number of flashes corresponds to the
same MODE number. Be sure to count the flashes.
3.
Release the MODE button following the number of
flashes that reflects the desired MODE. The orange
LED will flash the number of times indicating which
MODE has been set.
Example:
To set MODE 2 hold the MODE button for 2
flashes of the red LED, release and the orange LED will
flash 2 times to confirm the MODE 2 setting.
Note:
Once the MODE has been set, it will remain the
same until it is changed following the above steps.
KEY REPEAT FUNCTION
To turn on the Key Repeat function, hold down buttons 2 and
4 together. Once you have turned it on, holding down a pedal
or button, (except button 6) in any MODE for more than two
seconds will repeat the key action twice per second until
released. Variances may occur in the repeat timing due to
environmental factors.
