Step 3:
Connect Transmission Cable as shown
Then open the nuts located several inches from the hand grip on the
cable and slip the cable between the bracket on the left side of the
handle and then secure the nuts firmly using an 11/16” wrench.
Note: Using the zip ties provided, loosely secure the cables to the handle towards the bottom of the
handle.
Surge Brake by Pass
If your trailer has a surge brake, you can by-pass the surge brake by plugging the trailer electric into
the receptacle next to the right tire of the tug This will allow you to push the trailer in reverse and
disengage the trailer surge brake so they will not lock up.
Wheelie Bars
THE HEIGHT OF THE CASTERING WHEELS CAN BE ADJUSTED BY PULLING THE PIN AND
RAISING OR LOWERING THE WHEELS AS ACCEPTABLE TO YOUR TERRAIN. YOU WANT
THEM AS CLOSE TO THE GROUND AS POSSIBLE, HOWEVER, IF YOU ARE WORKING ON
ROUGH TERRAIN YOU MAY HAVE TO BRING THEM UP SO YOU DO NOT HAVE
INTERFERENCE WITH DIPS AND VALLEYS IN YOUR TERRAIN.