Remove the shrink wrap. In addition to the tug and the the handle, the
following parts are included in the box with the necessary fasteners:
1. One (1) Quart of Oil
2. Two (2) Zip Ties (Large)
3. Spark plug wrench
4. Muffler Deflector
5. Oil Drain Plug (spare)
Step 1:
Slide the handle all the way through both “U”
bolts. Push the handle approximately 1 1/2” beyond the
second “U” bolt. If it appears the handle will not fit through
the “U” bolt, loosen the nuts below. This is a very close
tolerance so the bolt will not interfere with the caster
wheel. Once the handle is installed, tighten nuts securely.
Step 2:
Cut the zip tie and bring the throttle cable to the right side
of the handle and secure with a 5/16” wrench.