55
T R
MT- S
2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
Section Continued on Next Page
SYSTEM MENU
The BIND menu allows you to change the transmitter's Modulation Type, change the Channel Response Mode and Bind the
transmitter and receiver pair. All settings are model-specific, so you can have different settings to suit different models.
The Modulation Type must be chosen prior to Binding the transmitter and receiver. If these options are changed after
Binding, you will need to Bind the transmitter and receiver pair again for the changes to take affect.
**Make sure the Modulation Type you choose matches the Modulation Type of the receiver you're using!**
The following Modulation Types are available*:
FH3
- Select this Modulation Type when using Airtronics or Sanwa 2.4GHz FH3 surface receivers.
FH4T
- Select this Modulation Type when using Airtronics or Sanwa 2.4GHz FH4 or FH4T surface receivers (default).
IMPORTANT:
Not all BIND menu functions are supported by all Modulation Types. Only supported functions will be
displayed once a Modulation Type is chosen. For example, the FH3 Modulation Type does not support the SSR Channel
Response Mode. FH3 Modulation Type does not support Telemetry.
*Other Modulation Types May Be Shown and Will Vary By Region. Not All Modulation Types are Legal to Use in All Regions.
BIND MENU {BINDING, MODULATION TYPE AND CHANNEL RESPONSE MODE}
SYSTEM
Changing the Modulation Type:
The Modulation Type function allows you to choose the transmitter Modulation Type. The Modulation Type should be changed
to match the receiver you're using. For example, if you use an Airtronics or Sanwa 2.4GHz FH3 surface receiver with your
transmitter, you would need to change the Modulation Type to FH3. The Modulation Type should be chosen prior to Binding
the transmitter and receiver pair.
1) From within the SETTING menu, press the UP or DOWN keys to highlight the BIND
menu.
4) Press the ENTER key. SET TO FH3? (or the Modulation Type you selected) NO/YES
will be displayed. Press the UP or DOWN keys to highlight YES, then press the ENTER
key. The Modulation Type will be changed.
If you want to go back and change the Modulation Type or if you don't want to
change the Modulation Type for any reason, choose NO or press the BACK key.
Changing the Channel Response Mode:
The Channel Response Mode function is used to change the Response Mode of each channel to suit the type of servos you're
using. The combination of using Digital servos and using the correct Channel Response Mode results in increased reaction
speed and improved feel, making you feel more connected to your model than ever. For example, using the SHR Channel
Response Mode with any brand of Digital servo will Increase the servo's Response Time, even above the manufacturer's
specification. For the fastest Response Time possible, use the SSR Channel Response Mode with Airtronics or Sanwa Super
Response SRG Digital servos.
1) From within the BIND menu, press the UP or DOWN keys to highlight the desired
channel you would like to change the Channel Response Mode for.
2) Press the ENTER key to open the BIND menu, then press the UP or DOWN keys to
highlight RF MODE : FH4T.
3) Press the ENTER key, then press the UP or DOWN keys to choose the desired
Modulation Type, either FH3 or FH4T.
BIND RF MODE setting range is FH3 and FH4T. The default setting is FH4T.
