6408 216th Street SW
|
Mountlake Terrace, WA 98043 USA
T
+1.425.778.7728
F
+1.425.778.7727
|
www.SymetrixAudio.com
22
Quick Start Guide
A&E Specs • Declaration of Conformity
Architects and Engineers Specifications
The device shall provide two inputs that are selectable as
line or mic level with phantom power and four outputs (two
line level analog and two AES3 digital). All signal processing
(including input gains) shall be controllable via software.
Audio inputs and outputs shall be accessed via rear panel
XLR connectors.
The Graphical User Interface (GUI) software shall be installer
programmable using the Windows
®
XP or Vista operating
system. Computer connection and control shall be via
the devices’ rear panel Ethernet connector. The GUI shall
provide display and control of all signal processing and
configuration functions including, but not limited to: Input
and Output Gain • Highpass Filtering • Lowpass Filtering
• De-essing • Downward Expansion • Compression •
Parametric Equalization • Signal Routing • Voice Symmetry
• Polarity.
The front panel shall include input and output level indication
as well as indicators for POWER, NETWORK, and REMOTE.
Additionally, a front panel LCD shall display certain system
parameters and may be used for preset recall via the front
panel UP, DOWN and MENU buttons.
External control shall include preset selection and/or
comprehensive parameter adjustment, depending upon the
particular remote in use, and shall be via industry-standard
CAT5 cable with RJ45 connectors to the front or rear panel
REMOTE ports.
All program memory shall be non-volatile and provide
program security should
power fail. 3rd party control systems may interface via
Ethernet using a published Control Protocol.
Audio conversion shall be 24-bit, 48 kHz with configurable
output sample rate. The dynamic range of the processor
shall not be lower than 113 dB A-weighted.
The device shall have an IEC power input socket. The unit
shall meet UL/CSA and CE safety requirements and comply
with CE and FCC Part 15 emissions limits. The unit shall be
RoHS compliant. The chassis shall be constructed of cold
rolled steel and moulded plastic, and mount into a standard
19” 1U EIA rack.
The device shall be an AirTools model
Voice Processor 2x, Engineered by Symetrix.
Declaration of Conformity
We,
Symetrix Incorporated
, 6408 216th St. SW,
Mountlake Terrace, Washington, USA, declare under our
sole responsibility that the product:
Voice Processor 2x
to which this declaration relates, is in conformity with the
following standards:
UL 60065, cUL 60065, IEC 60065,
EN 55103-1, EN 55103-2, FCC Part 15, RoHS
The technical construction file is maintained at:
Symetrix, Inc.
6408 216th St. SW
Mountlake Terrace, WA, 98043 USA
The authorized representative located within the European
Community is:
World Marketing Associates
P.O. Box 100
St. Austell, Cornwall, PL26 6YU, U.K.
Date of issue: February 1, 2009
Place of issue: Mountlake Terrace, Washington, USA
Authorized signature:
Dane Butcher, President,
Symetrix Incorporated
.
