User Manual Airtocheck monitor
English
Version 3.0
24
Calibration:
Option of calibrating the monitor.
Please note!
This feature is only available if the ‘Limited menu’ feature has been turned off and is intended for
Airtocheck service staff.
Reprogram:
Option of adding new software to the monitor.
Please note!
This feature is only available if the ‘Limited menu’ feature has been turned off and is intended for
Airtocheck service staff.
SND delay:
Option of setting the delay time for operating the internal and external horn. The internal and external horn will be
activated once the delay time has passed.
1.
Press the Menu key 9
to open the menu.
2.
Press key 12 3 times to select the SYSTEM menu.
3.
Press the Enter key 13 to open the SYSTEM menu.
4.
Press key 11 until the ‘SND Del. __sec’ option is shown.
5.
Press the Enter key 13 .
6.
Press keys 10 and/or 11 to set the desired delay time. (The delay time can be set in 10-second
increments, ranging from 10 to 300 seconds).
7.
Press the Enter key 13 to confirm the delay time.
8.
Press the Menu key 9
2 times to return to the home screen.
Recall default:
This option allows you to remove all of the monitor’s variable settings and return it to the settings you have saved
using the ‘Set default’ feature.
The following settings can be recalled:
Printer ON/OFF, Alarm ON/OFF, Measurement settings A/B/C/D/E/off, SMS ON/OFF, NAME, SMS delay, APN,
Internet ON/OFF, PIN code modem, SMS tel. no., P1 Relay, SND delay, Language, Sensors, High level E, Low level E.
Please note!
This feature is only available if the ‘Limited menu’ feature has been turned off.
Only use this feature if you are absolutely sure that you want to return the monitor to its default
settings! Once you activate this feature, you not be able to retrieve your previous settings.
2.
Press the Menu key 9
to open the menu.
3.
Press key 12 3 times to select the SYSTEM menu.
4.
Press the Enter key 13 to open the SYSTEM menu.
5.
Press key 11 until the ‘Recall default’ option is shown.
Please note!
As soon as you complete the next step, the current settings will be deleted and the monitor
will return to its home screen.
6.
Press the Enter key 13 : the current settings will be deleted and the monitor will return to its home screen.