8
4. Press the
button to choose a desirable humidity setting. The indicator
will show the setting you have selected. In order to keep the room at the
selected level of humidity/comfort the unit will cycle ON and OFF.
NOTE:
L (low) the unit will keep the humidity level around the 30% RH
Between L and M unit will keep the humidity level around the 40%
RH
M (medium) the unit will keep the humidity level around the 50% RH
Between M and H unit will keep the humidity level around the 60%
RH
H (high) the unit will keep the humidity level around the 70% RH
C (continuously) the unit will work continuously
5. Use the Timer button
to set the unit to automatically switch off in 2, 4 or
8 hours. While the unit is running, you can set the timer to switch the unit off.
6. This product is designed to allow the use of an external humidistat device
connected with the power supply cord. If using an external humidistat, press the
button so that the humidity level can be solely set by the external device.
The timer also doesn’t work in this mode, Only the Fan speed can be altered
between High, medium and Low.
7. Top cover is equipped with a child lock. Please use a small coin or flat head
screwdriver to unlock it. When the cover is opened for servicing or removing the
water wheel, the power will be cut-off automatically to avoid any electrical
shock/injury.
8. When the water level drops to the Min level, there will be a 10sec audible
alarm and the red light will illuminate and keep flashing. You can only reset it by
re-filling water into the tank.
9. This humidifier has a memory function .When the unit is routinely turned off
without any power interruption, the previous Fan & Humidity settings will
become the default settings when the unit is switched on the next time.
This is
often referred to as auto restart after power cut.
10. The unit has 6 casters of which two are lockable. These two casters are at
the left and right of rear side of the unit. We strongly recommend when the unit
is in operation these two casters are locked by pushing down the lock lever.
IMPORTANT:
once the room humidity is higher than the set parameter, the unit
will not turn on
Move the unit gently and very carefully when it is filled with water in
order to avoid water splashing onto the floor or internal electrical
parts.
When restarting the unit or opening and re-placing the top cover,
TANK FULL and TANK EMPTY sensors will re-detect the water level,
and give the signals accordingly.
