AirTek AT075AE User Manual Download Page 7

6

EN

Cleaning the Mesh Filter and Antibacterial Honeycomb Cooling Pad

+

Removing the Mesh Filter / Antibacterial Honeycomb Cooling Pad

+

:

The appliance is supplied with a Mesh Filter and Antibacterial Honeycomb Cooling Pad

+

.

The Mesh Filter and Antibacterial Honeycomb Cooling Pad

+

 are located inside the Rear Grill.  See 

Figure 1 for instructions on how to remove them from the unit for cleaning and maintenance.
Do not run the unit in COOL mode with stale water in the tank. You must empty the water tank and 
refill with fresh water, especially if the tank has not been cleaned in a long time.
The cleaning frequency for the Antibacterial Honeycomb Cooling Pad

+

 depends on local air and water 

conditions. In areas where the mineral content of water is high, mineral deposits may build up on 
the Antibacterial Honeycomb Cooling Pad

+

 and restrict air flow. Draining the water tank and refilling 

with fresh water at least once a week will help reduce mineral deposits. If mineral deposits remain on 
the Antibacterial Honeycomb Cooling Pad

+

, the media should be removed and washed under fresh 

water. The media should be cleaned every two months or sooner, depending on your needs.
For best results allow the Antibacterial Honeycomb Cooling Pad

+

 to dry after each use by turning off 

the cool function 15 minutes before turning the unit off.


• 
 
 
 
 
 

Carefully pull out the rear grill from the cooler.

Slide out the Antibacterial Honeycomb Cooling Pad

+

.

Slide out the Mesh Filter and clean with water.

Replace or clean media with water and a damp cloth as needed.

1.

2.

3.

4.

WARNING:

 DO NOT operate the Air Cooler when the Rear Grill is removed from the Air Cooler, or if 

there is a loose-fitting Rear Grill. Doing so can cause serious injury or dangerous electrical shock.

Figure 1

Antibacterial Honeycomb 

Cooling Pad

+

Mesh Filter

Rear Grill

USE & OPERATION (CONTINUED)

+ Antibacterial Honeycomb is up to 99%

A

 effective in killing certain types of bacteria through 48 hours of continuous use.

 

Based on independent laboratory testing (report # 2020FM2738), testing the antibacterial and cleaning function of the honeycomb 

   cooling pads against Escherichia coli (strain #ATCC8739), Staphylococcus aureus (strain #ATCC 6538P), Klebsiella Pneumoniae 

   (strain # ATCC 4352) , as per testing standard JIS L 1902:2008 designed for testing antibacterial and cleaning functions for household,    

   and similar electrical appliances.

Summary of Contents for AT075AE















Reviews: