4
EN
USE & OPERATION (CONTINUED)
Make sure to position the air cooler correctly before you set up and start using the product.
Please refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide.
CAUTION:
Unplug the unit from the electrical power outlet before emptying or refilling
the water tank.
To refill, rotate the water tank knob and slide out the water tank located at
the back of the unit.
The Water Level Indicator is located at the front of the unit. Refill the water
tank when water level is low. Do not fill water above the "Max." water level
mark to avoid water droplets collecting on the louvers. Check the water level
in the tank before running the COOL function. Make sure that the water in
the tank is above the minimum water level mark. Running the unit in COOL
mode with inadequate water may cause pump failure.
Note:
The water capacity refers to the total volume of water that can be
contained within the air cooler water tank and water distribution system.
The water capacity in the tank at the “Max.” indicator level may be lower
than the actual water capacity of the air cooler.
Note:
If ice is available, you may add ice in the top ice compartment to enhance
the cooling performance.
WARNING:
Do not fill water tank with dirty water or salt water. This can
damage the unit and Honeycomb media.
COOLER LOCATION
FILLING WITH WATER
Ice Compartment
Water Tank
