FUNCTION BUTTONS (CONTINUED)
WIND TYPE
NOTE:
•
•
•
•
•
•
•
•
•
•
The remote control requires a CR2025 (1x3V) coin type or equivalent battery for replacement.
Open the battery compartment at the back of the remote control and insert batteries inside. Care
must be taken to insert the batteries according to the correct polarity (+ / –) markings shown inside
the battery compartment.
Always point the remote control signal transmitter towards the unit when operating. Make sure that
the signal path is not obstructed.
Remove the batteries if the unit is not going to be used for an extended period of time.
Do not drop the remote control.
Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.
Do not mix old and new batteries.
Do not recharge the battery.
Exhausted batteries are to be removed from the product and safely disposed of as per local regulations.
Do not dispose of batteries in fire. Batteries may explode or leak.
WARNING:
Caution for ingestion of the small battery. Keep away from children and animals.
COOL
Press the COOL button until the COOL indicator light is illuminated on the control panel. This activates
evaporative cooling. The water pump will operate and you will feel the cooler air after the Honeycomb
Cooling Media is completely wet.
Note:
When the COOL indicator light is switched OFF, the unit can still function in a fan only mode (without
evaporative cooling).
ON/OFF
Low / Medium / High
Controls the motion of the louvers
Controls the Timer function for automatic off
Controls cooling or fan option
Switch between Random & Sleep
POWER / IONIZER
SPEED
SWING
TIMER
COOL
WIND TYPE
:
:
:
:
:
:
Press the Wind button to select your desired wind type: Random or Sleep
Random
:
This mode mimic a natural breeze
.
Sleep
:
This mode is for comfort during the night.
3
EN
USE & OPERATION (CONTINUED)
REMOTE CONTROL
