Airtecnic ENERGY BOX AC, Operation Manual

Page: 26 / 44

w w w . a i r t e c h n i c . g r
Energy Box AC-Α, AC
26
w w w . a i r t e c h n i c . g r

ATHENS
+30 211 70 55 500 /
THES/NIKI
+30 2311 82 40 00
CONTROL-DX
Operation Description Basic Panel Pro Panel
Fan Speed Control
3 steps fan speed control of supply and exhaust fan is
available.
3 steps (2 fans)
(High/Med/Low)
Boost Function
It is used for increasing fan speed:
Alternative-1: Via boost button on the control board
Alternative-2: Via dry contact or light power input (230V)
(like kitchen light, bathroom light etc.) on PCB board.
Standard Standard
Filter Function
There are 2 alternatives to control filters:
Alternative-1: It records run time of the unit and when
set time expires, control board gives an alert for filter
change.
Alternative-2: Filter change time can be controlled with
pressure switch mechanically. With this method, when
filter needs to be changed control board gives an alert .
Standard
Optional
Standard
Optional
By-Pass Function*
Filtered fresh air is supplied indoor without passing in
heat exchanger.
Optional Optional
Sensor (VOD)
Fans are running continuously in accordance with CO
2
sensor, air quality sensor or humidity sensor.
----------- Optional
Frost Protection
Function
Where outdoor air is too low, this function is a protection
method to prevent heat exchanger from freezing.
Standard Standard
Pre-Heater
Function
Where outdoor air is too low, fresh air is heated by a
pre-heater before it enters into the unit. This function is a
protection method to prevent heat exchanger from
freezing.
Optional Optional
External Control
(BMS) Function
IN: Unit can be on/off via control board.
OUT 1: Information of “unit status”.
OUT 2: Information of “fault”.
Standard Standard
Modbus Function
It controls all functions of unit via PC or central
automation board.
Standard Standard
Weekly Timer
Function
Unit can be programmed to operate on certain periods
of the week.
----------- Standard
Log Function All possible working options of the unit can be recorded. ----------- Standard
Fire Function
It is used for changing working status of the unit in case
of fire
Standard Standard
Warnings
- Filter change
- Fan Fault
- Pre-Heater Fault
- Heater Fault
Standard
(Display error
code
Standard
(Display error
code
Child-Proof
Protection
Function
It is used to lock the keypad.
Standard Standard
Note: * This function is standard in some units.