Unpacking
Unpack and check that all items have been enclosed.
Packing contents:
⑥
radio
②
antenna
③
battery pack
(1,700 mAH)
④
belt clip
⑤
hand strap
⑥
charger
⑦
user’s
manual
Optional
Accessories External speaker/microphone
1. Additional battery pack
Getting Ready
1.
Installation and Removal, Belt Clip
Installation
: Align the belt clip with the plastic slots of
the battery pack. Slide the belt clip onto the battery pack,
pushing firmly until a click heard.
Removal
: Hold up the belt clip release tab with a
fingernail or a coin (or like instrument). While holding up
the release tab, slide the belt clip out and away from the
battery pack.
2.
Installation and Removal, Battery Pack
Installation
: Turn off the transceiver. Hold the
transceiver with the back of the unit
facing up. Place the battery pack against
the back of the transceiver so that the
tabs on the transceiver engage the four
openings in the battery pack. Slide the
battery pack toward the top of the
transceiver until a click heard.
Removal
: Turn off the transceiver. Hold the radio with
the back of the unit facing up. With the thumbnail of your
other hand slide the latch lever down. While holding the
latch lever down, slide the battery pack down toward the
bottom of the transceiver. Separate the battery pack from
the transceiver.
3. Installation
Antenna
Rotate the antenna clockwise until it is seated firmly.
*. Before starting operation, make sure the battery is fully
charged.
2
