Airstream Classic Trailer 25' 2005, Owner'S Manual

Page: 77 / 126

AIRSTREAM CLASSIC TRAILER
F-10
ICROTECH™ FILTER
assembly on to the
then
care ly
The head will nee
½ turn counter c
slip past the safe
simultaneously
cloc
secure, a
3. Rese
butt
3
running
beca e
the first
life
i
of rapidl green light occurs, indicating that
the
. Flush the filter for 5 minutes before initial use.
You
1. T
twisting
unlock i
e faucet head away from the
spou
the fa c
d dep
ulled completely out of the spout.
port w
filte t straight off. Discard the old
filte ech 4
Not n correctly i
strea r without a f
faucet t function correctly in lter is not installed and the filter
button in depressed, unfiltered water will flow from both the filtered water outlet and the stream outlet
aerator, and the filter button will not automatically stay depressed.
Use only Microtech 400 or 600 filter cartridges with the PureTouch Classic Filtering Faucet system. The
Microtech filters are high performance carbon block filters developed specifically for the PureTouch
system.
M
INSTALLATION/REPLACEMENT
1. Install a new filter by wetting the outlet ports with
water and then inserting into the round filter ports on
the faucet head and pushing the filter and head
together. Both outlet ports must be fully inserted into
the filter ports.
2. Install the filter and faucet head
spou by
t wetting the faucet head o-ring seal and
ful sliding the free end of the filter into the spout.
ximately d to be initially turned appro
lockwise from its normal position to
ty catch. Lock the head into place by
pushing and twisting the head
kwise. When properly installed the head will feel
nd will be correctly oriented on the spout.
t the filter life indicator by pushing the filter
on times. Wait 10 seconds. You should not be
water while resetting the filter life indicator
us the filter button will remain depressed, with
push as it switches to filter mode. The filter
ind cator has been correctly reset if a short series
y flashing
new filter-flushing period has begun.
4
r new Moen faucet is now ready for normal use.
To replace filter:
urn off the faucet. Remove the faucet head by
it approximately ¼ turn counter clockwise to
t. Gently pull th
t and twist it approximately another ¼ turn to get
u et head past the safety catch. The faucet head
leted filter (if one is installed) can now be an
p
2. The filter is held to the faucet head by two outlet
, hich connect into the head. Remove the old s
r by simply pulling i
r and install a new MicroT
00 or 600 filter.
l functio n unfiltered e: The faucet wil
o m mode with ilter installed. The
will no filter mode without a filter. If a fi