G - 5
PLUMBINg
G - 6
G
Water Pump And Strainer
Manufacturer:
USA
Canada
Flojet
Fluid Products Canada
20 Icon
55 Royal Road
Foothill Ranch, CA 92610
Guelph, Ontario, N1H 1T1
Phone: 949-859-4945
519-821-1900
The water pump and strainer are located under the sofa, on the curbside.
Access can be made through rear double doors. The strainer should be visu-
ally checked for accumulation of sand or debris that could affect water flow.
To clean the strainer screen:
With the clear plastic at the top press on the sides of the strainer releasing the
tabs holding the clear plastic top in place, hold the sides in and pull straight up
on the clear plastic top to remove the screen assembly. Rinse all debris from
the screen. Replace the screen assembly by aligning the screen in the seating
grooves and pressing gently down until tabs catch and hold the clear plastic
top in place.
The inlet and outlet hoses and the strainer assembly are held in place by
self sealing blue quick connect fittings. To disconnect a hose or the strainer,
grasp the blue tab on the female fitting by the grooved finger edges and
pull straight out on the tab. This will release the male fitting connected to
the hoses and strainer. Be sure that both the female and male fitting on the
disconnect are free of all debris and are not damaged before replacing.
Check the pump system for leaks anytime the disconnect fittings on the
hoses and/or strainer are removed.
nOTiCE
: Failure to check the quick disconnect fitting for water leaks
when reinstalling inlet and outlet hoses or the water pump strainer may
cause the pump system to leak causing damage to personal property
Quick
Disconnect
Fitting
Blue
Finger
Tab
Summary of Contents for Avenue 2011
Page 95: ...PLUMBING G 18 G NOTES ...
Page 121: ...APPLIANCES I 8 I NOTES ...