APPLIANCES
I - 5
I
I - 6
Choose the burner suitable for the pan dimensions making sure the burner
flame does not extend beyond the pan base (Fig. 2). Place the pan centrally on
the burner so that it is stable on the pan support.
IMPORTANT: NO PANS OR OTHERS OBJECTS MUST BE OVER THE
BURNERS DURING IGNITION OPERATION.
AUTOMATIC HOTPLATE IGNITION:
a) Push control knob in slightly, turn to ignition position (Large flame symbol).
Ignite the burner by pressing the ignition button, keep the control knob pressed
in for 3-5 seconds.
b) Release knob and turn to the required heat setting (large or small flame sym-
bol). The flames internal tongue should be blue and the outline well defined.
IMPORTANT: IF THE BURNER DOES NOT IGNITE IMMEDIATELY, TURN THE
KNOB TO “MINIMUM RATE” POSITION AND REPEAT THE OPERATION.
If ignition is still not possible have the appliance checked to ensure that
there is gas and/or electrical supply. If the unit still fails to ignite, turn the
gas off at the main supply and contact your dealer.
CLEANING INSTRUCTIONS. Turn off the appliance and allow to cool be-
fore cleaning. Cold water or a damp cloth may damage hot surfaces. Do
not use abrasive, corrosive, chloride-based products or steel pads. Do
not leave acidic or alkaline substances e.g. vinegar, salt, lemon juice etc.
on the appliance surfaces. Stainless steel surfaces and enamelled parts
should only be washed with soapy water or neutral detergent, rinsed and
dried. Only use clean sponges or cloths.
Warning
: Do not cook while under way. Hot food or liquid
could scald due to a sudden stop or accident.
Figure 2
Summary of Contents for Avenue 2011
Page 95: ...PLUMBING G 18 G NOTES ...
Page 121: ...APPLIANCES I 8 I NOTES ...
