CAMPINg
D - 9
D
D - 10
USING THE SILENCE FEATURES
Warning
:
Never remove the batteries to quiet an unwanted
alarm. Removing the batteries disables the alarm and removes your pro-
tection. Do not use the Silence Feature in emergency situations. It will not
correct a CO problem or extinguish a fire.
The Silence Feature is intended to temporarily silence the horn while
you identify and correct the problem. The Silence Feature can tem-
porarily quiet an unwanted alarm for several minutes. Press the Test/
Silence button on the alarm cover for at least 3-5 seconds. After the Test/
Silence button is released, the Red LED blinks during the silence mode.
SILENCING THE LOW BATTERY WARNING
This silence feature can temporarily quiet the low battery warning “chirp” for
up to 8 hours. You can silence the low battery warning “chirp”: press the Test/
Silence Button on the alarm cover.
Once the low battery warning “chirp” silence feature is activated, the unit con-
tinues to flash the Green light twice a minute for 8 hours. After 8 hours, the low
battery “chirp” will resume.
Replace the batteries as soon as possible; this
unit will not operate without battery power!
To deactivate this feature:
Press the Test/Silence button again. The unit will
go into Test Mode and the low battery warning will resume (LED flashes and
unit sounds “chirp” once a minute).
WHAT YOU NEED TO KNOW ABOUT CARBON MONOXIDE (CO). WHAT IS
CO?
CO is an invisible, odorless, tasteless gas produced when fossil fuels do not
burn completely, or are exposed to heat (usually fire). Electrical appliances typi-
cally do not produce CO.
These fuels include
: Wood, coal, charcoal, oil, natural gas, gasoline, kerosene,
and liquid propane.
Summary of Contents for Avenue 2011
Page 95: ...PLUMBING G 18 G NOTES ...
Page 121: ...APPLIANCES I 8 I NOTES ...