Airstream 54" SLANTWALL FAN Installation & Operation Manual Download Page 3

Page: 3 / 16

PNEG 1433 54” Galvanized Slant Wall Fan Installation Operation Manual - 3 -

A F E T Y

U I D E L I N E S

This manual contains information that is important for you, the owner/operator, to know and understand. This information relates to

protecting

personal safety

and

preventing equipment problems

. It is the responsibility of the owner/operator to inform anyone

operating or working in the area of this equipment of these safety guidelines. To help you recognize this information; we use the

symbols that are defined below. Please read the manual and pay attention to these sections. Failure to read this manual and it’s

safety instructions is a misuse of the equipment and may lead to serious injury or death.

This is the safety alert symbol. It is used to alert you to potential personal

injury hazards. Obey all safety messages that follow this symbol to avoid

possible injury or death.

WARNING

indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

DANGER

indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

CAUTION

indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury.

CAUTION

used without the safety alert symbol indicates a potentially

hazardous situation which, if not avoided, may result in property damage.

NOTE

indicates information about the equipment that you should pay special

attention to.

Summary of Contents for 54" SLANTWALL FAN

















Search results

Summary of Contents for 54" SLANTWALL FAN

Reviews:

Related manuals for 54" SLANTWALL FAN

Brands by name

Popular brands

Airstream 54" SLANTWALL FAN, Installation & Operation Manual

Search results

Summary of Contents for 54" SLANTWALL FAN

Reviews:

Related manuals for 54" SLANTWALL FAN

Brands by name

Popular brands