background image

 

9101239_1_CR_rev7.DOC

 

(revised July 2009) 

 

Limited Warranty 

The GSI Group, LLC. (“GSI”) warrants products which it manufactures to be free of defects in materials 
and workmanship under normal usage and conditions for a period of 12 months after sale to the original 
end-user or if a foreign sale, 14 months from arrival at port of discharge, whichever is earlier.  The end-
user’s sole remedy (and GSI’s only obligation) is to repair or replace, at GSI’s option and expense, 
products that in GSI’s judgment, contain a material defect in materials or workmanship.  Expenses 
incurred by or on behalf of the end-user without prior written authorization from the GSI Warranty Group 
shall be the sole responsibility of the end-user. 

 

Warranty Extensions

:

  The Limited Warranty period is extended for the following products: 

 

Product

Warranty Period

AP Fans and 
Flooring 

Performer Series Direct Drive  
Fan Motor 

  3 Years 

All Fiberglass Housings 

 Lifetime 

All Fiberglass Propellers 

 Lifetime 

Cumberland 
Feeding/Watering 
Systems 

Feeder System Pan Assemblies 

  5 Years ** 

Feed Tubes (1.75" & 2.00") 

10 Years * 

Centerless Augers 

10 Years * 

Watering Nipples 

10 Years * 

Grain Systems 

Grain Bin Structural Design 

  5 Years 

Grain Systems 
Farm Fans 
Zimmerman

 

Portable & Tower Dryers 

  2 Years 

Portable & Tower Dryer Frames 
and Internal Infrastructure † 

  5 Years 

 

GSI further warrants that the portable and tower dryer frame and basket, excluding all auger and auger 
drive components, shall be free from defects in materials for a period of time beginning on the twelfth (12

th

month from the date of purchase and continuing until the sixtieth (60

th

) month from the date of purchase 

(extended warranty period). During the extended warranty period, GSI will replace the frame or basket 
components that prove to be defective under normal conditions of use without charge, excluding the labor, 
transportation, and/or shipping costs incurred in the performance of this extended warranty. 

* Warranty prorated from list price: 
        0 to 3 years – no cost to end-user 
        3 to 5 years – end-user pays 25% 
        5 to 7 years – end-user pays 50% 
        7 to 10 years – end user pays 75% 
 
** Warranty prorated from list price: 
        0 to 3 years – no cost to end-user 
        3 to 5 years – end-user pays 50% 
 
  † Motors, burner components and    
     moving parts not included. Portable  
     Dryer screens included. Tower Dryer  
     screens not included. 
 

Conditions and Limitations: 

THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE LIMITED WARRANTY DESCRIPTION 
SET FORTH ABOVE.  SPECIFICALLY, GSI MAKES NO FURTHER WARRANTY OF ANY KIND, 
EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE OR USE IN CONNECTION WITH:  (i) PRODUCT 
MANUFACTURED OR SOLD BY GSI OR (ii) ANY ADVICE, INSTRUCTION, RECOMMENDATION OR 
SUGGESTION PROVIDED BY AN AGENT, REPRESENTATIVE OR EMPLOYEE OF GSI REGARDING 
OR RELATED TO THE CONFIGURATION, INSTALLATION, LAYOUT, SUITABILITY FOR A PARTICULAR 
PURPOSE, OR DESIGN OF SUCH PRODUCTS. 

GSI shall not be liable for any direct, indirect, incidental or consequential damages, including, without 
limitation, loss of anticipated profits or benefits.  The sole and exclusive remedy is set forth in the Limited 
Warranty, which shall not exceed the amount paid for the product purchased.  This warranty is not 
transferable and applies only to the original end-user.  GSI shall have no obligation or responsibility for any 
representations or warranties made by or on behalf of any dealer, agent or distributor. 

GSI assumes no responsibility for claims resulting from construction defects or unauthorized modifications 
to products which it manufactured.  Modifications to products not specifically delineated in the manual 
accompanying the equipment at initial sale will void the Limited Warranty. 

This Limited Warranty shall not extend to products or parts which have been damaged by negligent use, 
misuse, alteration, accident or which have been improperly/inadequately maintained.  This Limited Warranty 
extends solely to products manufactured by GSI.   

Prior to installation, the end-user has the responsibility to comply with federal, state and local codes which 
apply to the location and installation of products manufactured or sold by GSI. 

Summary of Contents for 54" SLANTWALL FAN

















Reviews: