605-0000-706 ProST Installation User Guide-Rev I
46
Plugging SDA-1 into wall outlet
Changing the SDA-1 Type II Plug Prongs
The SDA-1 Type II allows you to attach plug prongs suited to the electrical wall socket of the
country in which you are installing the equipment. Therefore, before plugging the SDA-1
Type II into the electrical outlet, ensure that the correct prongs are attached to the SDA-1
Type II.
To change the SDA-1 Type II plug prongs:
1.
On the rear of the SDA-1 Type II, slide the locking switch to OPEN.
2.
Remove the prongs by sliding the prongs in the direction away from the switch.
3.
Insert the desired prongs by aligning the prongs with the SDA-1 Type II's prong groove,
and then sliding the prongs onto the SDA-1 Type II until it reaches the end of the groove.
4.
Lock the prongs in place by moving the switch to LOCK.
Plugging the SDA-1 Type II into an Electrical Wall Outlet
After you have attached the suitable plug prongs onto the SDA-1 Type II , you can plug it
into a standard electrical wall outlet (110/240 VAC), as illustrated below.
Summary of Contents for ProST
Page 46: ...605 0000 706 ProST Installation User Guide Rev I 42 ...
Page 58: ...605 0000 706 ProST Installation User Guide Rev I 54 SDA PolyPhaser CPE ...
Page 59: ...Connecting Lightning and Surge Protector 55 SDA 4SDC PolyPhaser CPE ...
Page 64: ...605 0000 706 ProST Installation User Guide Rev I 60 ...
