Airspan EasyWiFi, Hardware Installation Manual, Page: 24 / 47

18120511-01 Airspan Networks Inc. 1
Connecting to LAN
EasyWiFi provides four 8-pin RJ-45 ports for 10/100BaseT (Fast Ethernet) interface
with the subscriber's network. These LAN ports are located on the back panel and
labeled
lan1 , lan2 , lan3 , and lan4 . The LAN ports support Half and Full duplexing
mode, Auto-Negotiation, and Auto-MDIX.
The EasyWiFi-to-computer cable setup is listed below:
„
Cable: straight-through CAT 5 STP Ethernet cable
„
Connector: 8-pin RJ-45 at both ends
„
Connector pinouts:
Pin Function
1 Tx+
2 Tx-
3 Rx+
6 Rx-
To connect EasyWiFi LAN ports to the subscriber's Ethernet network:
1. Plug the Category 5 Ethernet cable into the desired EasyWiFi 8-pin RJ-45
port.
2. Plug the other end of the Category 5 Ethernet cable into your computer's
LAN port located at the back of your computer.
4