AS4000 Subscriber Terminal
Installation and Commissioning
DLP 002
605-0000-454
Draft Issue 1.3 Date 8/02/00
Page 3 of 6
Securing Antenna Wall Bracket to wooden structure
1.
Using the wall bracket as a template, mark the first hole position.
2.
Drill a first hole pilot, 5mm diameter to a depth of 15mm (use a drilling depth
gauge), place the mounting bracket on the wall with the pivot hinge set for correct
panning. Screw the M8 Coach Bolt provided through the mounting bracket into the
hole. Tighten sufficiently to secure the bracket to the wall.
3.
Using a spirit level, adjust the position of the wall bracket and mark the remaining 3
holes.
4.
Drill the remaining pilot holes, 5mm diameter to a depth of 15mm, then fit the Hex
Head M8 Coach Bolts provided through the mounting bracket into the holes.
5.
Tighten all the bolts sufficient to ensure a firm fixing to the wall.
Securing Antenna Wall Bracket to brick/block structure
1.
Using the wall bracket as a template, mark the first hole position. Where the Antenna
is to be mounted to a brick built building, try to ensure that each hole coincides with
the middle of a brick and not the mortar course.
2.
Drill the first hole, 8mm diameter to a depth of 45mm (use a drilling depth gauge),
place the mounting bracket on the wall and then fit the Hex Head M6 Dyna Bolt
provided through the mounting bracket into the hole. Tighten sufficiently to secure
the bracket to the wall.
3.
Using a spirit level, adjust the position of the wall bracket and mark the remaining
three holes.
4.
Drill the remaining holes, 8mm diameter to a depth of 45mm, then fit the Hex Head
M6 Dyna Bolt provided through the mounting bracket into the hole.
5.
Tighten all the bolts sufficient to ensure a firm fixing to the wall.
