AirUnity 545 eNB 2.5GHz (B41) User Guide
UGD-D01127
Airspan Commercial and Internal Use
4
3.
Static sensitive components inside - do not remove the lid or base: No user serviceable
parts inside.
4.
Position the power cord to avoid possible damage; do not overload circuits.
5.
Do not place this product on or near a direct heat source, and avoid placing objects on
the terminal.
6.
Use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners. Disconnect the
power before cleaning.
7.
It is the user’s responsibility to install this device in accordance with the local electrical
codes.
8.
Installation of the AirUnity eNB unit must be performed by a professional installer.
9.
The circuit breaker where connected should be easily accessible in case you have to
disconnect the device.
10.
When installed in the final configuration, the product must comply with the applicable
Safety Standards and regulatory requirements of the country in which it is installed. If
necessary, consult with the appropriate regulatory agencies and inspection authorities to
ensure compliance.
Note:
Airspan products do not contain hazardous substances (as defined in UK Control of
Substances Hazardous to Health Regulations 1989 and the Dangerous Substances Regulations
1990). At the end of any Airspan products life cycle, the customer should consult with Airspan to
ensure that the product is disposed of in conformance with the relevant regulatory requirements
.