AirSynergy 2000 Installation Guide
Page 18
Commercial in Confidence
UGD-D01001 Rev B
1 About this Guide
This section discusses the purpose, intended audience, conventions, referenced documentation
and organization for this guide.
1.1 Purpose
This guide provides the workflow and step-by-step procedures for Installing the AirSynergy.
These procedures include:
Verify prerequisites
Install the AirSynergy radio
equipment
Install
the
PSU
equipment (optional)
Connect and manage cables
1.2 Intended Audience
This
guide
is
intended
for
persons
who
are
responsible
for
installing
the
AirSynergy
equipment.
These
persons
should
have
a
working
knowledge
of
the
equipment.
1.3 Conventions
This document uses the following informational conventions.
Icon
Description
Checkpoint:
Marks a point in the workflow where there may be an exit or branch
to some other procedure. At each
Checkpoint
the reason for an exit or branch is
given along with specific directions to locate the entry point in the other
procedure.
Reference:
Gives a resource in the workflow that may be needed to complete a
procedure along with specific directions to use the resource.
Caution:
Describes a possible risk and how to lessen or avoid the risk.
Advice:
Provides a recommendation based on best practice.
Note:
Provides useful information.
1.4 Referenced Documentation
AirSynergy 2000 Hardware Product Specification
AirSynergy Overview Guide (pending)
AirSynergy LTE Commissioning Manual
1.5 Organization of this Guide
This guide is organized into the following Sections:
About this Guide
Introduction
Getting Started
Verify prerequisites
