AirSpeed 1050 Installation Guide
DUG01545
Airspan Commercial and Internal Use
39
4. Insert the “split rubber gland” from side of the cable.
Note:
Inner diameter of rubber gland is in the range of 7 to 8mm (0.28-0.31) range.
Figure 59: Insert Rubber Gland on Cable
5. Insert the housing onto the RJ45 cable.
Figure 60: Insert Housing onto Cable
6. Insert the holder section onto the front of the RJ45.
Figure 61: Insert Holder onto RJ45
7. Fix the holder into the housing base. A “click” is heard when engaged.
Figure 62: Holder into Housing Base
