Page 4
Option B: Search for the camera:
There are three search options. You can search for MJEPG, H.264, and P2P cameras. (P2P
supports both (MJPEG P2P cameras and H.264 P2P cameras).
Touch the Search button. Then choose
H.264 network, MJPEG network,
or
P2P network
,
to search for any camera located on the same LAN as your iPhone or mobile device.
Once you find your camera, you then need to enter the User name and Password manually.
Note:
In H.264 network and MJPEG network modes, the default User name is admin, the
default Password is blank. In P2P network mode the default User name is admin, and default
password 000000.
Touch
to save the camera settings.
Option C: Add a camera manually
:
For H.264 and MJPEG cameras
:
For local viewing (connected to your LAN):
You can touch “Add” to add the camera
manually. Enter a Device name, IP address, Port number (default Port: 80 for MJPEG), use
Media Port for H.264 (default Media Port 38401), User name and Password.
Default User name: admin, no password). See left screen on next page.
