STEP 1
Open the trunk lid at the rear of the car. (If AirShroud is not cur-
rently stored inside the trunk, place it inside now with the battery
compartment facing towards the left.)
STEP 2
Make sure that the adjustable straps are properly hooked in place.
STEP 3
Move the device outwards so that
it suspends horizontally and firmly
outside the lower rim of the trunk,
with its sponge legs resting on the
side of the car.
10
HOW TO USE AIRSHROUD
PREPARATION OF AIRSHROUD
Before you cover your car, make sure that your car is relatively
clean. Remove any large organic material like twigs, nuts, leaves;
large pieces of dirt/dust; dried up bird droppings to avoid it
scratching on the surface of your car and also contaminate the
inside of the car cover when operating AirShroud.
The following assumes that you have already prepared your
device for your car. If you had not yet done so, please read the
‘Preparation of AirShroud’ section.
Attention!
Make sure that the hooks are firmly hooked
before you try to suspend the device outside to avoid
it from falling and causing injury to your feet, as well as
causing damage to the device.
HOW TO USE AIRSHROUD
COVERING YOUR CAR
