VisionAire™
EN
AirSep
®
Corporation
EN-9
MN137-1 rev. D
2.0
Concentrator Components
Review the figures below and become familiar with the important parts
of your
VisionAire
Oxygen Concentrator.
2.1
Front of Concentrator
Figure 1
Figure 1a
Oxygen Outlet
Low Oxygen
Concentration
Indicator
(optional – mandated for
EU and specific countries)
Top Handle
Specification
Label
Flowmeter
Adjustment
Knob
Hour Meter
Side Handles
Circuit Breaker
Reset Button
ON/OFF (I/0)
Power Switch
Operating
Instructions
Label
Caster(s)
EN
VisionAire™
EN-10
AirSep
®
Corporation
MN137-1 rev. D
Ø
Top and Side Handles:
o
Enables convenience in carrying the unit.
Ø
On/Off (I/0) Power Switch:
o
Starts and stops the operation of the unit.
Ø
Oxygen Outlet
o
Provides connection for a humidifier (if required) or cannula.
Ø
Circuit Breaker Reset Button:
o
Resets the unit after electrical overload shutdown
Ø
Flowmeter Adjustment Knob:
o
Controls the oxygen flow rate in liters per minute (LPM).
Ø
Low Oxygen Concentration Indicator
(optional – mandated for EU
and specific countries)
o
When equipped with an
Oxygen Monitor
– a warning LED
(amber) is activated on the front panel
(see Section 2.6 ‘ Safety
Features’ for details)
Ø
Hour Meter:
o
Records the concentrator’s cumulative hours of operation.
Ø
Operating Instructions Label:
o
Directs usage of the unit.
Ø
Casters:
o
Four casters enable unit to be easily moved, as needed.
Ø
Specification Label:
o
Displays electrical specifications and serial number.
