Airrex AH-300, User Manual

Page: 9 / 20

9
HOW TO USE
This mode enables the user set the desired temperature,
and once it is fixed this heater works automatically with
running and stop repeatedly to meet this temperature.
(If power ON and Heater starts operation,the temperature control
mode will be operated as default.)
TEMPERATURE CONTROL
♣ Tip
·The current temp is less than -9
℃
(16
℉
), the dispaly of
the temp. is 'LO', and more than 50
℃
(99
℉
) it dispalys
as 'HI' (50
℃
is not same value as 99
℉
, actually 37
℃
is
same value as 99
℉
)
· The setting temperature is increased/decreased
1
℃
by pushing of (▲/▼) button, if you push the
button more than for 2sec.
the value is increased/decreased 1
℃
in 0.2 sec.
· If you push ▲and▼ button for 5sec.
simultaneously, the unit is converted from
℃
to ,
℉
or from
℉
to
℃
(The defaulte unit is
℃
)
1. Push On/Off button.
TILT
LOCK
LOCK
Cur Temp Set Temp / Time
FUEL
EMPTY
MISSFIRE
OVERHEAT
TILT
LOCK
LOCK
Cur Temp Set Temp / Time
FUEL
EMPTY
MISSFIRE
OVERHEAT
TILT
LOCK
LOCK
Cur Temp Set Temp / Time
FUEL
EMPTY
MISSFIRE
OVERHEAT
TILT
LOCK
LOCK
Cur Temp Set Temp / Time
FUEL
EMPTY
MISFIRE
OVERHEAT
4. During operaton, the current temp. and setting temp.
both are displayed, and if you push On/Off button
and make the operation stop, only current temp.
is shown.
3. By pushing '▼▲' button, please select
desire temperature.
· The setting range : 0~40
℃
· The default value : 25
℃
· During the time you push ▼ or ▲, the setting
temperature is increased/decreased very fast.
· The range of current temp display : -9~50
℃
2. By pusing Temp/Time button, please select
Temperature control mode.
· At that time, Temperature control lamp is lighten.
5. When the setting temp. is higher 2
℃
than current temp., it starts operation, and
the setting temp. is less than 1
℃
than
current temp., the operation is stop.
· Current temp.
＜
Setting temp. … Opeartion (+2
℃
)
· Current temp.
＞
Setting temp. … Opearation stop (-1
℃
)
TILT
LOCK
LOCK
Cur Temp Set Temp / Time
FUEL
EMPTY
MISSFIRE
OVERHEAT