AirPatrol Lite RoomUnit, User Manual

Page: 12 / 140

12
ERROR mode on RoomUnit
ERROR is displayed when there is
a communication problem between
RoomUnit and ControlUnit.
In ERROR state RoomUnit shows
battery level, room temperature,
floor temperature (RoomUnit with IR
sensor).
RoomUnit does not show heating mode,
temperature limits or other info that
should be received from ControlUnit.
Warning!
For indoor use only. Avoid exposure to
sunlight, dust, corrosive materials. Do
not drop or subject the device under
shock. Do not attempt to service or
disassemble. Attempting to open or
service the unit voids all warranties.
When experiencing problems with
the device, remove batteries and
discontinue use. Do not use the device
near water.
This device contains software
“SmartHeat firmware”, which may
be updated by AirPatrol without the
user influencing this if the device is
connected to the internet.
AirPatrol 2-Year Product Warranty
AirPatrol warrants to the original
purchaser of this AirPatrol SmartHeat
that the product shall be free of
defects in design, assembly, material,
or workmanship.
AirPatrol will repair or replace, at its
option, any defective product free of
charge (except for shipping charges
for the product). AirPatrol reserves the
right to discontinue any of its products
without notice, and disclaims any
limited warranty to repair or replace
any such discontinued products. In the
event that AirPatrol is unable to repair
ERROR MODE, WARRANTY & SUPPORT